Hatchling Racks for Pythons/Boas/Yearling Colubrids from $85 shipped!

[MohrSnakes]

I created these hatchling racks for hatchling python and boas as well as some yearling colubrids (cornsnakes, kingsnakes, ratsnakes, etc.) They hold 10 containers each. The containers are the standard Ziploc 76oz/9.5cup container and can easily be found at your local Wal-Mart, Target, grocery store, etc (see more pictures for size comparison) . The standard rack is made of pine shelving outside and waterproof tileboard for the 'shelves'. This is a lidless system and each 'top' for the bin is waterproof tileboard. The rack size is just shy of 3 feet (34 inches) tall, 10 inches wide and almost a foot deep. I left the wood raw and unfinished so you can do a number of things: paint, stain, polyurethane or just leave it that way. The wood is exactly how I get it and may contain imperfections or knots but I personally think this adds character to the unit. There is a sixteenth of an inch space between the container and shelf for air exchange and I've used these systems and sent them out for prototype test with ball pythons and have not any problems. That being said, however, I do not guarantee these are problem free...use common sense and watch the snakes when you first put them in the rack and make sure there is enough air exchange and the moisture is correct for your particular specimen. Drilled holes in the container may be necessary depending on your individual conditions. Also note, there is NO heat on these units and I do not install heat tape but some of my customers have done it and say it works well. For that reason, the back is tileboard and is fastened with removable screws if you desire to install heat tape.

Starting at $85 shipped!


See website for more information and pictures!

Thanks,
-Jeff


ORDER ONLINE AT: www.snakeracks.com